Rainbow-electronics DS2433 Manuel d'utilisateur télécharger pdf (Page 21)

DS2433

21 of 21

the pullup resistor to recover to a high level. For a read-zero time slot, it ensures that a read will occur

before the fastest device(s) release the line.

13) The duration of the low pulse sent by the master should be a minimum of 1µs with a maximum value

as short as possible to allow time for the pullup resistor to recover the line to a high level before the 1-

Wire device samples in the case of a write-one time or before the master samples in the case of a read-

one time.

1 2 ... 16 17 18 19 20 21

Pas de commentaire

Rainbow-electronics DS2433 Manuel d'utilisateur Page 21