Rainbow-electronics MAX1531 Manuel d'utilisateur Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 33
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
MAX1530/MAX1531
Multiple-Output Power-Supply Controllers for
LCD Monitors
10 ______________________________________________________________________________________
Typical Operating Characteristics (continued)
(Circuit of Figure 1; including R5, R6, and D2; T
A
= +25°C, unless otherwise noted.)
Pin Description
PIN
MAX1530 MAX1531
NAME FUNCTION
1 1 DRV2
Gamma Linear Regulator (LR2) Base Drive. Open drain of an internal N-channel MOSFET.
Connect DRV2 to the base of an external PNP pass transistor to form a positive linear
regulator. (See the Pass Transistor Selection section.)
2 2 FBL2
Gamma Linear Regulator (LR2) Feedback Input. FBL2 regulates at 1.245V nominal.
Connect FBL2 to the center tap of a resistive voltage-divider between the LR2 output and
AGND to set the output voltage. Place the divider close to the FBL2 pin.
3 3 FBL3
Gate-On Linear Regulator (LR3) Feedback Input. FBL3 regulates at 1.245V nominal.
Connect FBL3 to the center tap of a resistive voltage-divider between the LR3 output and
AGND to set the output voltage. Place the divider close to the FBL3 pin.
4 4 DRV3
Gate-On Linear Regulator (LR3) Base Drive. Open drain of an internal N-channel MOSFET.
Connect DRV3 to the base of an external PNP pass transistor to form a positive linear
regulator. (See the Pass Transistor Selection section.)
510, 18, 19 N. C. No Connection. Not internally connected.
11 11 RSTIN
Adjustable Reset Input. RESET asserts low when the monitored voltage is less than the
reset trip threshold. RESET goes to a high-impedance state only after the monitored
voltage remains above the reset trip threshold for the duration of the reset timeout period.
Connect RSTIN to the center tap of a resistive voltage-divider between the monitored
output voltage and AGND to set the reset trip threshold. The internal RSTIN threshold of
90% of 1.238V allows direct connection of RSTIN to any of the devices positive feedback
pins.
LR5 NORMALIZED LOAD REGULATION
MAX1530 toc25
LOAD CURRENT (mA)
VOLTAGE ERROR (%)
40302010
-0.8
-0.6
-0.4
-0.2
0
-1.0
050
LR5 NORMALIZED LINE REGULATION
MAX1530 toc26
INPUT VOLTAGE (V)
OUTPUT-VOLTAGE ERROR (%)
-13-17-21
0
0.2
0.4
0.6
0.8
1.0
-0.2
-25 -9
20mA LOAD CURRENT
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 32 33

Commentaires sur ces manuels

Pas de commentaire