Rainbow-electronics GE863-PY Manuel d'utilisateur Page 73

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 80
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 72
GE863 Hardware User Guide
1vv0300783 Rev.0 - 10/06/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 73 of 80
Recommendations for PCB pad surfaces:
Finish Layer thickness [µm] Properties
Electro-less Ni /
Immersion Au
3 –7 /
0.05 – 0.15
Good solder ability protection, high
shear force values
The PCB must be able to resist the higher temperatures, which are occurring at the lead-free process.
This issue should be discussed with the PCB-supplier. Generally, the wet-ability of tin-lead solder
paste on the described surface plating is better compared to lead-free solder paste.
12.1.5 Solder paste
Lead free
Solder paste
Sn/Ag/Cu
12.1.6 GE863 Solder Reflow
The following is the recommended solder reflow profile
Vue de la page 72
1 2 ... 68 69 70 71 72 73 74 75 76 77 78 79 80

Commentaires sur ces manuels

Pas de commentaire