Rainbow-electronics DS1721 Manuel d'utilisateur télécharger pdf (Page 16)

DS1721

16 of 16

NOTES:

1. All voltages are referenced to ground.

2. I/O pins of fast mode devices must not obstruct the SDA and SCL lines if V

is switched off.

3. I

specified with T

OUT

pin open.

4. I

specified with V

at 5.0V and SDA,SCL = 5.0V, 0°C to 70°C.

5. See typical accuracy curves for specification limits outside the temperature range indicated.

6. After this period, the first clock pulse is generated.

7. The maximum t

HD:DAT

has only to be met if the device does not stretch the LOW period (t

LOW

) of the

SCL signal.

8. A fast mode device can be used in a standard mode system, but the requirement t

SU:DAT

>250 ns must

then be met. This will automatically be the case if the device does not stretch the LOW period of the

SCL signal. If such a device does stretch the LOW period of the SCL signal, it must output the next

data bit to the SDA line t

MAX+t

SU:DAT

1000+250 = 1250 ns before the SCL line is released.

9. C

- total capacitance of one bus line in pF.

TIMING DIAGRAMS Figure 7

TYPICAL DS1721 THERMOMETER PERFORMANCE CURVE Figure 8

TBD

1 2 ... 11 12 13 14 15 16

Pas de commentaire

Rainbow-electronics DS1721 Manuel d'utilisateur Page 16