Rainbow-electronics ATmega64L Manuel d'utilisateur télécharger pdf (Page 289)

289

ATmega16(L)

2466B–09/01

ATmega16 Typical Characteristics – Preliminary Data

The following charts show typical behavior. These figures are not tested during manu-

facturing. All current consumption measurements are performed with all I/O pins

configured as inputs and with internal pull-ups enabled. A sine wave generator with rail-

to-rail output is used as clock source.

The power consumption in Power-down Mode is independent of clock selection.

The current consumption is a function of several factors such as: operating voltage,

operating frequency, loading of I/O pins, switching rate of I/O pins, code executed and

ambient temperature. The dominating factors are operating voltage and frequency.

The current drawn from capacitive loaded pins may be estimated (for one pin) as

*f where C

= load capacitance, V

= operating voltage and f = average switch-

ing frequency of I/O pin.

The parts are characterized at frequencies higher than test limits. Parts are not guaran-

teed to function properly at frequencies higher than the ordering code indicates.

The difference between current consumption in Power-down Mode with Watchdog

Timer enabled and Power-down Mode with Watchdog Timer disabled represents the dif-

ferential current drawn by the Watchdog timer.

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 297 298

Pas de commentaire

Rainbow-electronics ATmega64L Manuel d'utilisateur Page 289