Rainbow-electronics Atmega169L Manuel d'utilisateur télécharger pdf (Page 166)

166

ATmega169V/L

2514A–AVR–08/02

The recommendations of the maximum receiver baud rate error was made under the

assumption that the Receiver and Transmitter equally divides the maximum total error.

There are two possible sources for the receivers baud rate error. The Receiver’s system

clock (XTAL) will always have some minor instability over the supply voltage range and

the temperature range. When using a crystal to generate the system clock, this is rarely

a problem, but for a resonator the system clock may differ more than 2% depending of

the resonators tolerance. The second source for the error is more controllable. The baud

rate generator can not always do an exact division of the system frequency to get the

baud rate wanted. In this case an UBRR value that gives an acceptable low error can be

used if possible.

Table 72. Recommended Maximum Receiver Baud Rate Error for Normal Speed Mode

(U2X = 0)

# (Data+Parity Bit) R

slow

(%) R

fast

(%) Max Total Error (%)

Recommended Max

Receiver Error (%)

5 93.20 106.67 +6.67/-6.8 ± 3.0

6 94.12 105.79 +5.79/-5.88 ± 2.5

7 94.81 105.11 +5.11/-5.19 ± 2.0

8 95.36 104.58 +4.58/-4.54 ± 2.0

9 95.81 104.14 +4.14/-4.19 ± 1.5

10 96.17 103.78 +3.78/-3.83 ± 1.5

Table 73. Recommended Maximum Receiver Baud Rate Error for Double Speed Mode

(U2X = 1)

# (Data+Parity Bit) R

slow

(%) R

fast

(%) Max Total Error (%)

Recommended Max

Receiver Error (%)

5 94.12 105.66 +5.66/-5.88 ± 2.5

6 94.92 104.92 +4.92/-5.08 ± 2.0

7 95.52 104,35 +4.35/-4.48 ± 1.5

8 96.00 103.90 +3.90/-4.00 ± 1.5

9 96.39 103.53 +3.53/-3.61 ± 1.5

10 96.70 103.23 +3.23/-3.30 ± 1.0

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 316 317

Commentaires sur ces manuels

Pas de commentaire

Rainbow-electronics Atmega169L Manuel d'utilisateur Page 166

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Rainbow-electronics Atmega169L