Rainbow-electronics ATmega64C1 Manuel d'utilisateur télécharger pdf (Page 188)

188

7647A–AVR–02/08

ATmega32/64/M1/C1

– 0 - no interrupt.

– 1 - burst receive interrupt: set when the frame buffer receive is completed.

• Bit 3 – SERG: Stuff Error General

Writing a logical one resets this interrupt flag.

– 0 - no interrupt.

– 1 - stuff error interrupt: detection of more than 5 consecutive bits with the same

polarity.

• Bit 2 – CERG: CRC Error General

Writing a logical one resets this interrupt flag.

– 0 - no interrupt.

– 1 - CRC error interrupt: the CRC check on destuffed message does not fit with the

CRC field.

• Bit 1 – FERG: Form Error General

Writing a logical one resets this interrupt flag.

– 0 - no interrupt.

– 1 - form error interrupt: one or more violations of the fixed form in the CRC delimiter,

acknowledgment delimiter or EOF.

• Bit 0 – AERG: Acknowledgment Error General

Writing a logical one resets this interrupt flag.

– 0 - no interrupt.

– 1 - acknowledgment error interrupt: no detection of the dominant bit in acknowledge

slot.

16.10.4 CAN General Interrupt Enable Register - CANGIE

• Bit 7 – ENIT: Enable all Interrupts (Except for CAN Timer Overrun Interrupt)

– 0 - interrupt disabled.

– 1- CANIT interrupt enabled.

• Bit 6 – ENBOFF: Enable Bus Off Interrupt

– 0 - interrupt disabled.

– 1- bus off interrupt enabled.

• Bit 5 – ENRX: Enable Receive Interrupt

– 0 - interrupt disabled.

– 1- receive interrupt enabled.

• Bit 4 – ENTX: Enable Transmit Interrupt

Bit 76543210

ENIT ENBOFF ENRX ENTX ENERR ENBX ENERG ENOVRT CANGIE

Read/Write R/W R/W R/W R/W R/W R/W R/W R/W

Initial Value00000000

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 365 366

Pas de commentaire

Rainbow-electronics ATmega64C1 Manuel d'utilisateur Page 188