Rainbow-electronics ATmega64C1 Manuel d'utilisateur télécharger pdf (Page 245)

245

7647A–AVR–02/08

ATmega32/64/M1/C1

• Bit 6 – ISRCEN: Current Source Enable

Set this bit to source a 100µA current to the AREF pin.

Clear this bit to use AREF pin as Analog Reference pin.

• Bit 5 – AREFEN: Analog Reference pin Enable

Set this bit to connect the internal AREF circuit to the AREF pin.

Clear this bit to disconnect the internal AREF circuit from the AREF pin.

• Bit 4 – Res: Reserved Bit

This bit is unused bit in the ATmega32/64/M1/C1, and will always read as zero.

• Bit 3, 2, 1, 0– ADTS3:ADTS0: ADC Auto Trigger Source Selection Bits

These bits are only necessary in case the ADC works in auto trigger mode. It means if ADATE

bit in ADCSRA register is set.

In accordance with the Table 18-7, these 3 bits select the interrupt event which will generate the

trigger of the start of conversion. The start of conversion will be generated by the rising edge of

the selected interrupt flag whether the interrupt is enabled or not. In case of trig on PSCnASY

event, there is no flag. So in this case a conversion will start each time the trig event appears

and the previous conversion is completed..

18.9.4 ADC Result Data Registers – ADCH and ADCL

When an ADC conversion is complete, the conversion results are stored in these two result data

registers.

When the ADCL register is read, the two ADC result data registers can’t be updated until the

ADCH register has also been read.

Consequently, in 10-bit configuration, the ADCL register must be read first before the ADCH.

Table 18-7. ADC Auto Trigger Source Selection

ADTS3 ADTS2 ADTS1 ADTS0 Description

0000Free Running Mode

0 0 0 1 External Interrupt Request 0

0 0 1 0 Timer/Counter0 Compare Match

0 0 1 1 Timer/Counter0 Overflow

0 1 0 0 Timer/Counter1 Compare Match B

0 1 0 1 Timer/Counter1 Overflow

0 1 1 0 Timer/Counter1 Capture Event

0 1 1 1 PSC Module 0 Synchronization Signal

1 0 0 0 PSC Module 1 Synchronization Signal

1 0 0 1 PSC Module 2 Synchronization Signal

1 0 1 0 Analog comparator 0

1 0 1 1 Analog comparator 1

1 1 0 0 Analog comparator 2

1 1 0 1 Analog comparator 3

1110Reserved

1111Reserved

1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 365 366

Commentaires sur ces manuels

Pas de commentaire

Rainbow-electronics ATmega64C1 Manuel d'utilisateur Page 245

Commentaires sur ces manuels

Produits connexes et manuels pour Capteurs Rainbow-electronics ATmega64C1